MILL panel convection radiator Wi-Fi 1000W steel low profile

• Power: 1000w

• Thermostat: Electronic, day/night program

• Material heating element: Aluminum

• Frame material: steel

• Color: Mill white

• Cable: White, 130cm

• Output cable directions: Right side

• IP classification: IPX4 (approved for use in the bathroom)

• Product size: (121.0 x 7.8 x 25.0 cm)

• Recommended room size: 12 - 16 m2

Purchasing instructions:

Room size
You will need to measure the size of the room, i.e. floor area in square meters and ceiling height before deciding which model you need. If the room is too large, you may need several heaters to distribute the heat evenly between each source. In mild climates use approx. 60-70 watts per square meter for calculation purposes and 70-85 watts per square meter for cooler climates.

A well-insulated house?
The age and insulation of your home will also affect your heating needs. Fewer watts per square meter are needed for newer homes and apartments with heat flow, while older and less well-insulated homes will need proportionally more watts per square meter.

Avoid thermal bridging
Although modern windows are airtight, they are usually not as well insulated as walls. The air in them will quickly cool and sink towards the ground. This is called a thermal bridge, and it can be avoided by installing a suitable heating element under each window.

Go for more watts than you need
Once you know how many watts you need, avoid buying a heater that just fits your needs. Buy the kind of product that gives you a little extra performance so you don't have to work at full power. As a result, the temperature of the surface of the heater will also be suitably lower.